Description
STAUNCH Electric water pump 2HCP160B
Application
Suitable for use with clean water that does not contain abrasive particles and liquids that are not chemically aggressive towards the
materials from which the pump is made.
They are easy to use and are economical,they are ideal for domestic use and in particular for distributing water in combination with
small pressure sets and for the irrigation of gardens and allotments.
The pump comes complete with a flap-check valve.
The pump should be installed in an enclosed environment,or at least sheltered from
inclement weather.
Motor
1. Two-pole induction motor(n=2850 r.p.m)
2. Insulation Class B
3. Protection IP44
4. Continuous service S1
5. Thermal protector
6. Single-phase 220V/50Hz, 60Hz if request
7. Three-phase 380V/50Hz, 60Hz if request
Operating conditions
1. Liquid temperature to 600oC
2. Ambient temperature to 400oC
3. Total suction lift up to 8m
Technical Data
| Component | Construction |
| Pump body | Cast iron with brass/AISI304 insert if request,reduces the risk of impeller seizure |
| Pump support | Cast iron with brass/AISI304 insert if request,reduces the risk of impeller seizure |
| Motor housing | Aluminum,Sheet steel for CP130 |
| Impeller | Brass |
| Motor shaft | Carbon steel, AISI420/304 SS if request |
| Mechanical seal | Ceramic/Graphite |
| Bearings | 6202 RZ/6203 RZ (1 HP), 6204 RZ/6204 RZ (1.5HP&2HP) 6205 RZ/6304 RZ (3HP), 6205 RZ/6306 RZ (4HP) |
| No. | MODEL | POWER | Q(m5 /h) | 0 | 1.5 | 3 | 4.5 | 6 | 7.5 | 9 | |
| kW | HP | Q(I/min) | 0 | 25 | 50 | 75 | 100 | 125 | 150 | ||
| D | 2HCP-160B | 1.5 | 2 | H | 54 | 50 | 47 | 42 | 34 | 24 | 8 |
| No. | Model | INLET/OUTLET | N.W | L X W X H |
| (Inch) | (Kg) | mm | ||
| D | 2HCP-160B | 11/2” x 1” | 27 | 455 x 255 x 290 |
