Description
STAUNCH Electric water Pump CPM190-2
Application
suitable for use with clean water that does not contain abrasive particles and liquids that are not chemically aggressive towards the materials from which the pump is made.
They are easy to use and are economical, they are ideal for domestic use and in particular for distributing water in combination with small pressure sets and for the irrigation of gardens and allotments.
The pump comes complete with a flap-check valve.
The pump should be installed in an enclosed environment, or at least
sheltered from inclement weather.
Motor
1. Two-pole induction motor (n=2850 r.p.m)
2. Insulation Class B
3. Protection IP44
4. Continuous service S1
5. Thermal protector
6. Single-phase 220V/50Hz, 60Hz if requested
Operating conditions
1. Liquid temperature to 600oC
2. Ambient temperature to 400oC
3. Total suction lift up to 8m
Technical Data
| Component | Construction |
| Pump body | Cast iron with brass/AISI304 insert if request reduces the risk of impeller seizure |
| Pump support | Cast iron with brass/AISI304 insert if request reduces the risk of impeller seizure |
| Motor housing | Aluminum, Sheet steel for CP130 |
| Impeller | Brass |
| Motor shaft | Carbon steel, AISI420/304 SS if requested |
| Mechanical seal | Ceramic/Graphite |
| Bearings | 6201 RZ/6201 RZ(0.5HP), 6202 RZ/6202 RZ (0.75HP&1 HP)6204 RZ/6204 |
| RZ (1.SHP,2HP&3HP) |
| No. | MODEL | Q(m5 /h) | 0 | 0.6 | 1.2 | 1.8 | 2.4 | 3 | 3.6 | 4.2 | 4.8 | 5.4 | 6 | 6.6 | 7.2 | 7.8 | ||
| POWER | ||||||||||||||||||
| kW | HP | Q(I/min) | 0 | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | ||
| D | CPM190-2 | 1.5 | 2 | H | 41 | 40 | 39 | 38 | 36.5 | 35 | 33.5 | 32 | 30 | 27.5 | 25 | 22 | 20 | 18.5 |
| No. | Model | INLET/OUTLET | N.W | L X W X H |
| (Inch) | (Kg) | mm | ||
| D | CPM190-2 | 1” x 1” | 19 | 400 x 240 x 290 |
