Description
STAUNCH Electric water Pump Jet -100 A/B/C
Application
Suitable for use with clean water that does not contain abrasive particles and liquids that are not chemically aggressive
towards the material from which the pump is made.
The self-priming jet pumps are designed to pump water even in cases where the air is present. As a result of their reliability and the fact that they are easy to use, they are recommended for use in domestic applications such as the distribution of water in combination with small or medium-sized pressure sets, and for the irrigation of gardens and allotments. The pump should be installed in an enclosed environment or at least sheltered from inclement weather.
Motor
1. Two-pole induction motor(n=2850 r.p.m)
2. Protection IP44
3. Thermal protector
4. Three-phase 380v/50Hz,60Hz if requested
5. Liquid temperature up to 60 C
6. Total suction lift up to 8m
7. Insulation Class B
8. Continuous service S1
9. Single-phase 220V,50Hz,60Hz if request
10. Operating conditions
11. Ambient temperature up to 40 C
Technical Data
| Component Construction | |
| Pump body | Cast iron, with brass/AISI304 SS, insert if requested, reduces the risk of impeller seizure |
| Pump support | Cast iron, with brass/AISI304 SS, insert if requested, reduces the risk of impeller seizure |
| Motor housing | Aluminum, Sheet steel for CP130 |
| Impeller | Brass |
| Diffuser | Noryl |
| Motor shaft | Carbon steel, AISI420/304 SS if requested |
| Mechanical seal | Ceramic/Graphite |
| Bearings | 6202 RZ/6202 RZ(0.5HP, VP5M by ZZ), 6204 RZ/6204RZ (1.2HP, 1.5HP & 2HP) |
| No. | MODEL | POWER | Q(m3/h) | 0 | 0.6 | 1.2 | 1.8 | 2.4 | |
| kW | HP | Q(I/min) | 0 | 0 | 5 | 10 | 15 | ||
| A | Jet -100 A/B/C | 0.75 | 1 | H | 53 | 43.5 | 53.5 | 30 | 24 |
